Filter
Top Products
Using the Finisher Option
Using Finisher/Sorters 7 - 5
Selecting Staple Mode
Note: The optional finisher and bridge unit must be installed to use this function.
1
Touch the desired Staple
Position key.
2
Using the keypad, enter the number of copy sets you require.
3
Set the originals in place, then press the Start key. Your copy sets are stapled and exit to the
Finisher Shift Tray.
Depending on the finisher that you have, the following staple positions are available:
Top: Staples on the upper left corner, left margin.
Top: Staples on the upper left corner, diagonal.
Top: Staples on the lower left corner, left margin.
Double: Staples on the left margin in two places.