Filter
Top Products
Using the Finisher Option
Using Finisher/Sorters 7 - 3
Selecting Sort Mode
Note: The optional finisher and bridge unit must be installed to use this function.
1
Touch the Sort or Rotate Sort
key.
Note: If Rotate Sort is not
shown, it may be selected
with User Tools.
2
Using the keypad, enter the
number of copy sets you desire.
3
Set the originals in place, then press the Start key.
Note: If an original is misfed during sort copying, reset your originals in the
Document Feeder, according to the instructions on the display. The display will
indicate the number of scanned originals.
Sorting mode can save you a lot of time. You can have your copies automatically sorted in two
ways:
Rotate Sort: Every other copy set is rotated by 90 degrees and
delivered to the exit tray. Note: the same size paper must be in two
different paper trays and one must e landscape and the other portrait.
Shift Sort: Every other copy set is shifted for ease of separation. The
saddle stitch finisher shifts only the top sheet of each set.