Filter
Top Products
Installing the hard disk drive fan assembly
This procedure applies only to server models that have a hard disk drive fan
assembly.
Attention:
v Replace a failed fan within 48 hours.
v To ensure proper cooling and airflow, do not operate the server for more than 30
minutes with the side cover removed.
To install the hard disk drive fan assembly, complete the following steps:
1. Insert the hard disk drive fan assembly retaining tab 1 over the right edge of
the hard disk drive backplane; then, rotate the fan assembly toward the
backplane. Do not fully close the hard disk drive fan assembly 3.
If you have the eight-drive, 2.5-inch hot-swap hard disk drive model, the hard
disk drive fan assembly looks like the following illustration.
92 ThinkServer TS100 Types 6431, 6432, 6433, and 6434: Hardware Maintenance Manual