Filter
Top Products
Fax status messages
103
Understanding MFP messages
Fax status messages
Cancel jobs messages
Message Meaning
Answering The MFP is answering a fax call.
Call complete A fax call is completed.
Connect <x>bps The fax is connected. x is the baud rate per second.
Dialing A fax number is dialed. If the number is too long to fit on the screen,
only the word Dialing appears.
Fax failed The fax failed to send.
Fax memory full The attempted fax job is canceled since memory is full.
Job stored for delayed transmission. The scanning completes for a delayed send fax job.
Line busy A fax number is dialed, but the fax line is busy.
No answer A fax number is dialed, but no connection is made.
No dial tone The MFP does not have a dial tone.
Queued for sending The scanning process of a fax job completed, but it is not sent yet
because another fax job is being sent or received. As this one job
waits for its turn, this message appears for three seconds.
Receive complete The MFP has received an entire fax job.
Receiving page [n] The MFP receives page [n] of the fax job, where n is the number of the
page received.
Sending page [n] The MFP sends page [n] of the fax job, where n is the number of the
page sent.
Set clock The Real Time Clock is not set. This message appears if no other fax
status message appears. It remains until the clock is set.
Set the clock.
Waiting for redial The MFP is waiting to redial the fax number.
Message Meaning
Deleting selected job(s) The Delete button is touched after jobs have been selected.
Job cannot be deleted A job in the job list is touched, but it cannot be canceled.
No jobs selected The Delete button is touched when no jobs are selected.