Filter
Top Products
Settings
50
Using the MFP menus
Printer Language Specifies the default printer
language used to
communicate data from the
computer to the MFP.
Note: This menu item is not
available from the control
panel. It is only available on
the MFP Embedded Web
Server. Setting a printer
language as the default does
not prevent a software
application from sending print
jobs that use the other
language.
PCL Emulation
PS Emulation*
PCL emulation—Uses a PCL interpreter for
incoming host communications.
PostScript emulation—Uses a PS interpreter
for incoming host communications.
Print Area Modifies the logical and
physical printable area.
Note: This menu item is not
available from the control
panel. It is only available on
the MFP Embedded Web
Server.
Normal*
Whole Page
Note: The Whole Page setting only affects
pages printed using PCL 5 interpreter. This
setting has no effect on pages printed using
the PCL XL or PostScript interpreters. If
attempting to print any data in the non-
printable area defined by Normal Print Area,
the MFP clips the image at the boundary
defined by the Normal defined printable area.
Download Target Specifies the storage location
for downloaded resources.
Storing downloaded
resources in flash memory or
on a hard disk is permanent
storage rather than the
temporary storage that RAM
provides. The resources
remain in the flash memory or
on the hard disk even when
the MFP is turned off.
Note: This menu item is not
available from the control
panel. It is only available on
the MFP Embedded Web
Server.
RAM* All downloaded resources are automatically
stored in printer memory (RAM).
Flash All downloaded resources are automatically
stored in flash memory.
Note: Flash appears as a menu item if a
formatted, nondefective optional flash
memory card which is not Write or Read/Write
password protected is installed.
Disk All downloaded resources are automatically
stored on the hard disk.
Note: Disk appears as a menu item if a
formatted, nondefective hard disk that is not
Write or Read/Write password protected is
installed.
Job Accounting Specifies to store or not store
statistical information about
the most recent print jobs on
the hard disk. The statistics
include whether the job
printed with or without errors,
the print time, the job size (in
bytes), the requested print
media size and type, the total
number of printed pages, and
the number of copies
requested.
Note: This menu item is not
available from the control
panel. It is only available on
the MFP Embedded Web
Server.
Off* The MFP does not store job statistics on the
hard disk.
On The MFP stores job statistics for the most
recent print jobs.
Menu item Purpose Values and descriptions