Filter
Top Products
Settings
76
Using the MFP menus
Print Settings
Print settings consist of the following menus. Click any of the menus for more information
Base file name text entry The default value is the following word:
image
Note: There is a 53-character limit for the
base file name. The following characters
or symbols are invalid:
* – asterisk
: – colon
? – question mark
< – less than symbol
> – greater than symbol
| – vertical bar
A time stamp is added to the end of the
base file name.
Custom Job
scanning
Allows for scanning of custom scan
to USB jobs.
This is also known as Job Build.
Custom Job is not supported on all
models.
On
Off*
To set to On, select the check box.
To set to Off, clear the check box.
Background
Removal
Adjusts the amount of background
visible on a copy.
-4 to +4 (0*) -4 sets Background Removal to off.
+4 sets Background Removal to the
maximum allowed.
Contrast Specifies the contrast used for the
scan to USB job. The default is
dependent on the Content menu
item. If the Content menu item is
reset from the default setting, then
the default for Contrast is reset,
also.
0–5 Text default is 5.
The default is 0 for items other than text.
Shadow Detail Adjusts the amount of shadow
detail visible on a copy.
-4 to +4 (0*) -4 preserves the least amount of shadow
detail.
+4 preserves the most shadow detail.
Scan edge to
edge
Specifies if the original document is
scanned edge-to-edge prior to
sending the scan to USB job.
Off*
On
Finishing Menu PCL Emulation Menu
Quality Menu PDF Menu
Utilities Menu HTML Menu
Setup Menu Image Menu
PostScript Menu
Menu item Purpose Values and descriptions