Filter
Top Products
Settings
56
Using the MFP menus
Darkness Specifies the level of darkness
for the copy job.
1–9 (5*) A graphic representation depicts the values. As the
right or left scroll button is touched, the asterisk
moves back and forth on the line. 1 is next to the - and
9 is next to the +. As shown, 5 is the current value.
Output Bin Specifies the bin which
receives the copy once it is
printed.
*Standard Bin
[list of
available bins]
This menu item displays when at least one optional
output bin is installed.
Number of
Copies
Specifies the number of copies
for the copy job.
1–999 (1*)
Overlay Specifies the selection for
overlay text to print on each
page of the copy job.
The overlay looks similar to
the following on a page:
Confidential
Copy
Draft
Urgent
Custom
Off*
The Custom value is not shown unless text is entered
into the Custom Overlay text field from the EWS page.
The text used for the overlay is what the user entered
on the EWS page, but Custom must be selected in the
menu for the text to be printed as an overlay on each
page.
Custom
Overlay
Specifies a custom overlay. text entry field Use the text entry field to specify a custom overlay.
The field has a 64-character limit.
Allow priority
copies
Allows interruption to a
network print job, so the MFP
may be used as a copier to
copy a page or document.
On* Interrupts the print job at the next page.
Off Interrupts the print job at the next job boundary which
means between incoming individual print jobs.
Custom Job
scanning
Specifies if Custom Job
scanning is On or Off.
This is also known as Job
Build.
Custom Job is not supported
on all models.
On
Off*
To set to On, select the check box.
To set to Off, clear the check box.
Background
Removal
Adjusts the amount of
background visible on a copy.
-4 to +4 (0*) -4 sets Background Removal to off.
+4 sets Background Removal to the maximum
allowed.
Contrast Specifies the contrast used for
the copy job. The default is
dependent on the Content
menu item. If the Content
menu item is reset from the
default setting, then the default
for Contrast is reset, also.
0–5 Text default is 5.
The default is 0 for items other than text.
Menu item Purpose Values and descriptions
-+
C
o
n
f
i
d
e
n
t
i
a
l