Filter
Top Products
Settings
61
Using the MFP menus
Allow Save as
Shortcut
Allows for saving fax numbers as
shortcuts in the MFP.
Yes* A Save as Shortcut button appears on
the screen.
No A Save as Shortcut button does not
appear on the Fax Destination screen.
Dial Mode Specifies the dialing sound, either as a
tone or a pulse.
Note: This menu item may not be
available in all countries or regions.
Tone* A tone sounds for each number dialed.
Pulse A pulsating noise sounds for each
number dialed.
Custom Job
scanning
Allows for scanning of custom fax jobs.
This is also known as Job Build.
Custom Job is not supported on all
models.
On
Off*
To set to On, select the check box.
To set to Off, clear the check box.
Background
Removal
Adjusts the amount of background
visible on a copy.
-4 to +4 (0*) -4 sets Background Removal to off.
+4 sets Background Removal to the
maximum allowed.
Contrast Specifies the contrast used for the
scan job. The default is dependent on
the Content menu item. If the Content
menu item is reset from the default
setting, then the default for Contrast is
reset also.
0–5 Text default is 5.
The default is 0 for items other than
text.
Shadow detail Adjusts the amount of shadow detail
visible on a copy.
-4 to +4 (0*) -4 preserves the least amount of
shadow detail.
+4 preserves the most shadow detail.
Scan edge to
edge
Specifies if the original document is
scanned edge-to-edge prior to sending
the fax job.
Off*
On
Menu item Purpose Values and descriptions