Filter
Top Products
Attendance messages
116
Understanding MFP messages
56 USB port [x] disabled The MFP receives data through a
specified USB port, but this USB port
is disabled. x is the number of the
USB port.
Touch Continue. The MFP discards any data
received through the specified USB port.
Make sure the USB Buffer menu item is not set
to Disabled.
Touch Reset Active Bin to change to another
linked bin.
57 Configuration change,
some held jobs were not
restored
This message appears once after the
firmware tries to restore all of the jobs
on the hard disk regardless of the
number of held jobs that were not
restored.
Configuration of the MFP may have
changed due to:
• print media option(s) removal, such
as a tray or bin being removed
• the hard disk was installed from a
different MFP model
• the speed of the MFP
Touch Continue. Some held jobs are not
restored. They stay on the hard disk and are
inaccessible.
58 Too many flash
options installed
The MFP detects an excess of
optional flash memory cards installed.
Touch Continue to clear the message and
ignore the extra optional flash memory cards.
The message occurs again unless the excess
optional flash memory cards are removed.
1 Turn the MFP off.
2 Unplug the power cord from the wall outlet.
3 Remove the excess flash memory.
4 Connect the power cord to a properly
grounded outlet.
5 Turn the MFP on.
58 Too many trays
attached
The MFP detects that too many
optional drawers and their matching
trays are installed.
1 Turn the MFP off.
2 Unplug the power cord from the wall outlet.
3 Remove the additional drawers.
4 Connect the power cord to a properly
grounded outlet.
5 Turn the MFP on.
59 Incompatible duplex An unsupported optional duplex unit
is attached to the MFP.
Remove the optional duplex unit.
The MFP ceases normal functions until the
optional duplex unit is removed.
Touch Continue to clear the message once the
optional duplex unit is removed.
59 Incompatible envelope
feeder
An unsupported optional envelope
feeder is attached to the MFP.
Remove the optional envelope feeder.
The MFP ceases normal functions until the
optional envelope feeder is removed.
Touch Continue to clear the message once the
optional envelope feeder is removed.
59 Incompatible output
bin [x]
An unsupported output bin is
attached.
Remove the output bin, and then touch
Continue.
Note: Printer operations cease until the
message is cleared. The only way to clear the
message is to remove the bin.
Message Meaning Action