Filter
Top Products
8399
8399
N/B Maintenance
N/B Maintenance
54
2.2.4 HDD Module
Disassembly
1. Carefully put the notebook upside down. Remove the battery pack. (Refer to section 2.2.1 Disassembly)
2. Remove two screws fastening the HDD module and slightly lift up HDD module. (Figure 2-7)
3. Remove four screws to separate the hard disk drive from the bracket, free the hard disk driver. (Figure 2-8)
Figure 2-8 Free the HDD driverFigure 2-7 Remove HDD module
Reassembly
1. Attach the bracket to hard disk drive and secure with four screws.
2. Slide the HDD module into the compartment and secure with two screws.
3. Replace the battery pack. (Refer to section 2.2.1 reassembly)
MiTac Secret
Confidential Document