Filter
Top Products
8399
8399
N/B Maintenance
N/B Maintenance
61
5. To remove the inverter board on the lower part of the LCD housing , disconnect two cables. (Figure 2-19)
Reassembly
1. Reconnect the two cables. Fit the inverter board back into place and secure with one screw.
2. Replace the LCD cover and secure with two screws and rubbers.
3. Replace the LCD assembly. (Refer to section 2.2.8 Reassembly)
4. Replace the keyboard and battery pack. (Refer to sections 2.2.2 and 2.2.1 Reassembly)
Figure 2-19 Remove the inverter board
MiTac Secret
Confidential Document