Filter
Top Products
8399
8399
N/B Maintenance
N/B Maintenance
63
5. Disconnect the cable and free the LCD panel. (Figure 2-22)
Reassembly
1. Reconnect the cable, then replace the LCD brackets and secure with five screws.
2. Fit the LCD panel back into place and secure with eight screws, then reconnect the cable to the inverter board.
3. Replace the LCD cover and secure with two screws and rubbers. (Refer to section 2.2.9 Reassembly)
4. Replace the LCD assembly. (Refer to section 2.2.8 Reassembly)
5. Replace the keyboard and battery pack. (Refer to sections 2.2.2 and 2.2.1 Reassembly)
Figure 2-22 Free the LCD panel
MiTac Secret
Confidential Document