Filter
Top Products
8399
8399
N/B Maintenance
N/B Maintenance
60
2.2.9 Inverter Board
Disassembly
1. Remove the battery, keyboard and LCD assembly. (Refer to section 2.2.1, 2.2.2 and 2.2.8 Disassembly)
2. Remove two screws and rubbers on the corners of the LCD panel. (Figure 2-17)
3. Insert a flat screwdriver to the lower part of the LCD cover and gently pry the frame out. Repeat the process until
the cover is completely separated from the housing.
4. Remove the one screw fastening the inverter board. (Figure 2-18)
Figure 2-18 Remove the one screwFigure 2-17 Remove LCD cover
MiTac Secret
Confidential Document