Filter
Top Products
α
2 Simple Application Controllers
SMS/SMR/CD Functions and the Modem Setting 2
2 - 3
2.1.2 The “Initialize Modem...” Setting
When the “Initialize Modem...” button is clicked, the “Initialize Controller Modem” dialog box is
displayed. This box is used to enter the AT command for the modem and the “Power On
Delay” time.
A) Initialize Command
Enter the AT command for the modem. This setting will be automatically entered if one of the
preconfigured modems is chosen, see section 2.1.3.
B) Power On Delay
The Power On Delay will set the time in seconds that the
α
2 will wait on power-up before
sending the Modem Initialization command. The delay can help to ensure that the modem is
ready to receive the signal from the
α
2 in case there is a difference in the time necessary to
power-up each item.
2.1.3 Pre-Configured GSM Modem Initialization Setting
If using the Modem or GSM option, a preconfigured modem can be used. Choose the down
arrow to view the modem options.
Choose one of the listed modems and the AT command will be automatically entered into the
software parameter settings in “Initialize Modem...” The frame above shows a preconfigured
setting for a GSM modem. The option for the GSM modems is listed below.
)
)
B
A