Filter
Top Products
α
2 Simple Application Controllers
SMS/SMR/CD Functions and the Modem Setting 2
2 - 13
- Retentive
Check the "Retentive" checkbox is store the output value even after a Power cut.
- Maintenance
If this check box is checked the maintenance mode will be initiated.
F) Short Message Age
This value defines the duration of time that the short message is stored.
User can click "+" or "-" button to increase or decrease the short message age.
G) Word Output Range
This parameter is only used for when the word output mode is active.
-Min. value
Lower limit of the word output value. In case the word output value is smaller than
the min. value set, thus, the min. value will become active.
Min. Value range: -32768 (max. value -1)
-Max. Value
Upper limit of word output value. In case the word output value is greater than the max.
value, thus, the max. value will become active.
Max. Value range: 32767 (min. value +1)
H) Short Message Command
-Bit Output
The Bit output can be switched ON and OFF by the appropriate short message
command.
-Word Output
The word output value can be set by the appropriate value held in the short message
command.
I) SMR Password
Setting the SMR password in this dialog box will create a common password for all
equivalent SMR Function blocks.
Setting Range: 0 and 9999.
In order to avoid serious injury and the machine damage caused by unintended SMR FB
operation, provide safety devices as countermeasure.