Filter
Top Products
α
2 Simple Application Controllers
Remote Access 3
3 - 7
3.3.2 Standard Modem Settings
A standard modem can setup from the front panel keys but must be accessed from the VLS
software package.
Once the Modem option is entered, only two settings are required - the
AT command and the power On Delay setting. This is enough informa-
tion to initialize the modem connected to the
α
2 upon powerup
In the Top Menu, scroll down to the “Others/Serial Com/Modem” option
and Press “OK”.
3.3.3 The Command Setting
The modem option contains the “Command” and the “Delay Time”
setting. Choose “Command” to input the AT command. Details for the
AT command should be included in the literature of the modem. For
additional reference information, please see section 2.3 of this manual.
Enter the command by choosing the characters with the “ ”
and “ ”
arrows. When the desired letter is shown on screen, move to the right
“”
to add the next character. Do not press the “OK” key until the
command has been entered in its entirety.
Move to the left for editing purposes with the “ ” key.
3.3.4 The Delay Time Setting
The Delay Time parameter will delay the transmission of the
initialization command while the modem completes its power up.
Use the “+” key to increment the value and the “-” to decrement the
value within the range of 0 - 10 seconds. Enter the value by pressing
the “OK” key.
Se r ia l Co
No t Use
GSM
Other
Modem
m
Com
ModemI i t
Com and
De l ay
n
m
Time
ModemI i t
Com and
[
n
m
]
y{|}!#$"
01
z
ModemI i t
Com and
De l ay
n
m
Time
ModemI i tn
De l ayT ime
0s