Mitsubishi Electronics SDP-ECO 1630 III All in One Printer User Manual


 
Chapter 1 On Safety
LASER SAFETY.
The SDP-Eco1630 III is certified as a Class 1 laser product under the U.S.
Department of Health and Human Services (DHHS) Radiation
Performance Standard according to the Radiation Control for Health and
Safety Act of 1968. This means that the recorder does not produce
hazardous laser radiation.
Since radiation emitted inside the SDP-Eco1630 III is completely
confined within protective housings and external covers, the laser beam
can not escape from the machine during any phase of user operation.
CDRH REGULATIONS.
The Center for Devices and Radiological Health (CDRH) of the U.S.
Food and Drug Administration implemented regulations for laser products
on August 2, 1976. Compliance is mandatory for products marketed in
the United States. The level shown in the figure indicates compliance
with the CDRH regulations and must be attached to laser products
marketed in the United States.
For European model
The SDP-Eco1630 III is classified as a CLASS 1 LASER PRODUCT in
accordance with IEC Pub 1.1 825 1984.
Ordinary operation will not release laser radiation into the work
environment. Do not remove any of the safety covers for this product or
release any of its interlock switches. Laser radiation may cause injuries to
your body (e.g. weakened eyesight, skin cancer).
- 3 -