Mitsubishi Electronics SDP-ECO 1630 III All in One Printer User Manual


 
SDP-Eco1630 III USERS MANUAL
- 60 -
Left tray rail
Set screw
5) Remove the rinse water repleni-
sher bottle and drain the water in
the washing tank into the waste
chemical container.
6) Hold the handle on the processor rack section and pull out the processor
rack until it touches the stopper.
7) Grip the left and right stay rails along the sides of the processor rack to
remove it, and carry it to a convenient work place.
The rinse water nip roller weighs approximately 6.5 kg(14.3 lbs), so
please be very careful when handling it.
8) Remove the overflow tray.
9) Loosen the set screw to remove
the left tray rail.
Rinse water replenisher bottle
Rinse water
drain hose
Container for
waste
chemical
Caution