Filter
Top Products
SDP-Eco1630 III USERS MANUAL
- 12 -
Chapter 1 On Safety
• Installation space
As shown in figure below, clearance is required around the machine at all
times to assure adequate space for maintenance and safe passage during
emergencies.
1.8 Maintenance
• Maintenance that requires tools may only be performed by persons who
have been specially
trained with our authorized
curriculum.
• During machine mainte-
nance, the operator must
make it clear that the
machine should not be
turned ON and prevent
any person other than our
authorized technician(s)
from touching the
machine.
• Be sure to turn OFF the power switch and remove the power plug from
the outlet before you start maintenance, cleaning or repairs.
Power switch
(Unit: cm)
40 or
longer
79.5
40 or
longer
70 or longer
146.5
66.9
100
100 or
longer