Filter
Top Products
8.3 Status display
Status displays indicate the machine's current operation status.
Message Operation status
Initializing Machine is being initialized.
Start OK Remote operation is ready.
Cleaning Processor is being cleaned.
Heating Processor is being heated.
Exposing Machine is exposing an image.
Recovery Machine is in recovery.
Discharging Plate is being discharged.
8.4 Warning display
Message Warning contents
Pump Check This indicates that it is time to replace the pump, so
please contact the dealer where you purchased this
machine and request a pump replacement.
Press the key to clear this display and continue
processing.
Punch Dust Check This indicates that the punch box is full of dust.
Open the plate setting cover and take out the punch box
to dispose of the dust.
Pressing the key resets the punch counter to "0".
Rinse Tank Check Check the remaining amount of rinse water in the rinse
water replenishing bottle. Push the key to delete the
message. Be sure to reset the software counter in the
machine. Open the front door, and then close it to reset
the counter. For detailed information, refer to section "6.7
Rinse".
SDP-Eco1630 III USERS MANUAL
- 68 -