Filter
Top Products
SDP-Eco1630 III USERS MANUAL
- 62 -
Washing tank
Washing tank
Washing
tank
retainer
Set screw
Washing tank
Attachment section
Guide plate
14) Pull out the washing tank 30 to
40 mm toward the operator side
and remove it (toward the right).
15) Clean the washing tank with
water.
16) Insert the operator side of the
washing tank into the rectangular
slot in the processor. (See
illustration on the left.)
Slide the washing tank in
horizontally.
17) Set the back of the washing tank
on the guide plate and insert the
washing tank pressing it against
the left side of the guide.
18) Secure the operator side of the
tank with the washing tank
retainer.
Note
Washing
tank