Filter
Top Products
9) Pull out the washing tank 30 to
40 mm toward the operator side
and remove it (toward the right).
10) Pull the lower exit roller toward
you. Now you can remove the
bearing for a roller.
11) Remove the lower exit roller by
lifting the thumb ring installed to
the roller.
12) Clean the lower exit roller.
13) Wipe the roller until they are dry,
and re-attach them back in their
original positions.
SDP-Eco1630 III USERS MANUAL
- 58 -
Exit roller (lower)
Bearing for a
roller
Exit roller (lower)
Thumb ring
Washing
tank