Filter
Top Products
Beyond the basics
2.33
12
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER
.
13
Press
START
.
If in step 10 you chose an immediate transmission, your fax machine will begin dial-
ing. If you chose a delayed command, the machine will display “Reserved” on the
top line of the display, indicating that the machine has stored the command in
memory and will perform it later.
F-Code polling
1
Press
COM
-
OPTIONS
five times and then press
ENTER
.
2
Use the numeric keypad to enter the appropriate sub-address.
In this example, we’ve entered 123456.
Note: If you make a mistake, press
CANCEL
to back up, then enter the cor-
rect number.
3
Press
ENTER
. The
LCD
will show:
Note: If you know that this sub-address does not have a password, skip to
step 5.
4
Use the numeric keypad to enter the appropriate password. In this example,
we’ve entered 654321.
5
Press
ENTER
. The
LCD
will show:
6
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
START
.
7
What you do now depends upon when you want the polling to begin.
• To have it begin now, skip to step 10.
• To delay it, proceed to step 8.
8
Press
COM
-
OPTIONS
,
ENTER
. The
LCD
will show:
9
Use the numeric keypad to enter the day and time when the polling should
begin, then press
ENTER
.
10
Press
START
.
If in step 7 you chose an immediate polling, your fax machine will begin dialing. If
you chose a delayed command, the machine will display “Reserved” on the top line
of the display, indicating that the machine has stored the command in memory and
will perform it later.
Delayed
Enter Time: 15/17:05
Enter Fax Number
_
Enter Password
654321_
Enter Password
_
Enter Sub-Address
123456_
Enter Sub-Address
_