Filter
Top Products
What you see on the
LCD
What it means/What to do
Hang Up Phone
The optional handset is off the hook. Hang it up,
making sure the upper part of the handset
presses down on the “hook” button.
Insert Document
There was no document in the document feeder
when you tried to send a fax or make a copy.
Place a document in the feeder and try again.
Invalid I.D. Code
The F-Code box passcode you entered isn’t valid.
Try re-entering your F-Code box passcode.
Invalid Number
You pressed a key which has no function during
the current operation.
Invalid Passcode
The protection passcode you entered isn’t valid.
Repeat the operation, entering the correct protec-
tion passcode.
Line Busy
You tried to scan a document while the machine
is using the
PC
for fax communication. Wait for
the
PC
to complete the fax communication, then
try again.
Memory Full
You tried to store the document into memory,
but your fax machine doesn’t have enough mem-
ory to complete the operation. Wait until your
fax has enough memory to store the document.
Also, consider contacting your authorized
Muratec dealer for a memory upgrade.
Memory Overflow
During transmission (or copying), you tried to enter
more pages into memory than your fax could store.
Press
START
(or
COPY
) to tell your fax to keep as many
pages in memory as possible, or press
CANCEL
to
delete from memory all pages stored during this
operation (but not previous operations).
No Command
You pressed
REVIEW COMMANDS
to review
upcoming commands, but your fax machine had
none stored.
No Document Stored
You tried to print a document from memory, but
your fax machine had none stored.
No Number Stored
You selected an autodialer number for which
there is no phone number programmed. Either
choose another autodialer number or dial a
phone number directly from the numeric keypad.
What you see on the
LCD
What it means/What to do
No Passcode
You tried to protect an operation but there’s no
protection passcode stored in your fax machine.
Store a protection passcode in your machine,
then try protecting the operation again.
No PIN Number
You selected “Mode1” in the
PIN
mask feature
and tried to call an autodialer number in
which no
PIN
has been entered. Enter a
PIN
, then
try again.
No Report
You requested an activity journal, but your
machine has no record of any fax jobs that have
occurred.
PC-FAX In Use
While a
PC
-
FAX
feature is in use, you tried to use
a fax feature. Wait for the
PC
to complete the
operation, then try again.
Please Call Service
The printer unit of your machine has become
inoperable. Call your authorized Muratec dealer.
Please Remove Paper
A paper jam has occurred. Remove the jammed
paper (review pages 3.2–3.3 if necessary).
Please Replace Drum
Your drum cartridge no longer functions. Please
replace it, being sure to reset the drum counter
when you do so (see page 1.7).
Please Supply Toner
The toner cartridge is empty. Replace it.
Please Wait
Wait until the fax machine warms up.
Polling In Use
You tried to store the polling document in your
fax, where one already had been stored. Wait
for the fax to complete the polling operation, then
try again.
Printer In Use
The command you’re trying to enter requires the
use of the printer, which is already in use. Wait
for the fax to finish printing, then try again.
Protect Doc. Stored
A received document was in your fax’s memory
when you tried to turn off security reception or
erase the protection passcode. Print the received
document from your fax’s memory, then re-try
the desired operation.
Just in case …
3.7