Filter
Top Products
8-3SPECIAL FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
SPECIAL FEATURES
Function name Descriptions
Light indi-
cation
Reference
page
Dial Prefix
Use this to enter a “/N” symbol.
— 4-21
Bypass
Use this to set the paper size on the bypass tray.
— 2-16
Duplex Copy
Note 3
Use this to set the duplex copy. on 7-9
Page Counter
Displays total printed and scanned page.
— 8-8
Energy Save
Switches to the energy save mode immediately.
on 1-17
Online
Cancels PC printing. on
Note 4
Mode Switch
Switches the machine’s mode.
— 2-2
Note 1: The optional NIC (network interface card) is required.
Note 2: The optional 2nd phone kit is required.
Note 3: The optional duplex unit is required. (MFX-1330 only)
Note 4: For details of PC printing, refer to the PDF manual on the Printer & Scanner driver CD.
The following functions are the default settings:
MFX-1330 F-300
Soft key 1 Sort Copy Report
Soft key 2 Bypass Monitor
Soft key 3 Combine Pause /Dial Opt.
NOTE: When “Report”, “Fax & Copy”, “Memory Tx”, “Cover Page” or “Select TTI” are
selected, the function is only valid for the following trnasmission. Once that trans
-
mission is complete, the setting returns to its default setting. If you want to change
the default setting, see “User settings” on pages 10-1 to 10-8.
Programming a soft key
1
Press [Menu], [2], [1], [0], [3], then [Enter].
Select Soft Key No.
1:Sort Copy
The machine shows the function currently assigned to the soft key.
2
Press [ ] or [ ] to select the soft key (1 to 3) you want to change.
3
Press [Enter].
1:Sort Copy
/
/Enter
4
Press [ ] or [ ] to select the function you want to assign.
5
Press [Enter].
6
If you want to program another soft key, repeat this procedure from step 2.
To exit the operation, press [Reset].
7
Use the soft key labels supplied with your machine to label the soft key for easy refer-
ence.
NOTE: Default settings cannot be set into another soft key.