Filter
Top Products
i
1
2
3
4
5
7
6
9
8
11
10
12
A
Regulatory information
Customer information
United States of America
This equipment complies with Part 68 of FCC rules and the requirements adopted by
the ACTA. On the rear panel of this equipment is a label that contains, among other
information, a product identifier in the format US:DKUFA02B002C (for F-300) or US:
DKUFA02B003C (for MFX-1330). If required, this number must be provided to the
telephone company.
The REN is used to determine the number of devices that may be connected to a tele
-
phone line. Excessive RENs on a telephone line may result in the devices not ringing
in response to an incoming call. In most but not all areas, the sum of RENs should not
exceed five (5.0). To be certain of the number of devices that may be connected to a line,
as determined by the total RENs, contact the local telephone company. The REN for this
product is part of the product identifier that has the format US:DKUFA02B002C (for F-
300) or US:DKUFA02B003C (for MFX-1330). The digits represented by 02B are the REN
without a decimal point.
Your fax is designed for use on standard-device telephone lines. The fax connects to the
telephone line with a standard line called the USOC RJ-11C.
A plug and jack used to connect this equipment to the premises wiring and telephone
network must comply with the applicable FCC Part 68 rules and requirements adopted
by the ACTA. A compliant telephone cord and modular plug is provided with this prod
-
uct. It is designed to be connected to a compatible modular jack that is also compliant.
See installation instructions for details.
If the equipment MFX-1330 and F-300 causes harm to the telephone network, the tele
-
phone company will notify you in advance that temporary discontinuance of service may
be required. But if advance notice isn’t practical, the telephone company will notify the
customer as soon as possible. Also, you will be advised of your right to file a complaint
with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or pro
-
cedures that could affect the operation of the equipment. If this happens the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
If trouble is experienced with the equipment MFX-1330 and F-300, see operating
instructions for details. For further repair or warranty information, please contact
Muratec Customer Support Center at 800-347-3296 (from the U.S. only). If the equip
-
ment is causing harm to the telephone network, the telephone company may request
that you disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of the MFX-1330 and F-300 does not disable your alarm equip
-
ment. If you have questions about what will disable alarm equipment, consult your
telephone company or a qualified installer.
This equipment is hearing aid compatible.
When programming emergency numbers and/or making test calls to emergency num
-
bers: