Filter
Top Products
12-8 MAINTENANCE & PROBLEM SOLVING
Troubleshooting
Document jams
Case 1:
If a document jams in the ADF, the following message will be displayed.
Open&Close ScanCover
Reset Document
Also, if a document jam occurs during a quick memory transmission or real time trans-
mission, the following check message will be printed to tell you which page is jammed.
Case 2:
If a document jams while scanning into memory for sort copy or normal memory trans-
mission, the machine will show:
Document Jam
ContStor Enter/Cancl
1
If you want to continue the operation, press [Enter] and proceed to step 2.
To abort the operation, press [Cancel].
NOTE: If the machine is left idle for 3 minutes, the machine will abort the operation auto-
matically
2
The machine will show which page (i.e., which page number) is jammed. Clear the
document jam and reset document in the ADF from the jammed page forward, then
press [Start].
p 2. Reset Document
Press Start key
NOTE: • If the machine is left idle for 3 minutes, the machine will begin to send or copy
the document(s) it has.
• If you wish to cancel this operation, press [Stop]. The machine will delete all pages
from memory and then return to the standby mode.