Filter
Top Products
IV - 32
Section 4 - Chapter 4 - OkiNet for TCP/IP
OKI OkiLAN 6100e+ User’s Guide
Enabling/Disabling Protocols
To enable or disable protocols on the OkiLAN 6100e+,
select the Protocols tab. Select each protocol you wish
to enable. If you disable a protocol, the OkiLAN 6100e+
will no longer communicate using that protocol.
SNMP Trap Configuration
The SNMP Trap option allows configuration of traps.
Traps are unsolicited information concerning the
OkiLAN 6100e+. Traps can be sent to an SNMP
manager or be broadcast to all hosts on the local
segment.
To configure SNMP traps, select the SNMP Traps tab.
Note: SNMP options need to be configured only if
you are managing an OkiLAN 6100e+ or getting
system information using SNMP.
Protocol
Select the protocol for which you wish to configure
trap information.