Filter
Top Products
VIII - 10
Section 8 - Chapter 2 - OkiLAN 6100e Setup for Windows NT 3.51
OKI OkiLAN 6100e+ User’s Guide
Chapter 2
OkiLAN 6100e+ Set Up for
Windows NT 3.51
Overview
This section contains information on setting up your
OkiLAN 6100e+ for a Windows NT 3.51 environment.
Print options for Windows NT 3.51 include:
• OkiLAN 6100e+ Connect for IP
• OkiLAN 6100e+ Connect for DLC
• LPR
OkiLAN 6100e+ Connect for IP
OkiLAN 6100e+ Connect for TCP/IP is a full featured
utility that allows simple, direct, TCP/IP printing from
your computer to a printer attached to an OKI TCP/IP
enabled print server. OkiLAN 6100e+ Connect allows
you to print to print servers that are using Dynamic IP
addresses (DHCP). It will also notify you immediately
in the event of a printer error (e.g. Paper out). Print jobs
printed through OkiLAN 6100e+ Connect are sent
directly to the OkiLAN 6100e+ print server and not
routed through a network server, resulting in a
reduction of network traffic.
System Requirements
To use OkiLAN 6100e+ Connect for TCP/IP for your
Windows NT 3.51 operating system, your computer
must be configured to run TCP/IP. The OkiLAN
6100e+ print server must also be configured to run
TCP/IP.
Installation
To install OkiLAN 6100e+ Connect for TCP/IP, follow
the instructions below:
1. Install the OkiLAN 6100e+ Connect for TCP/IP