Filter
Top Products
I - 5
Section I - Chapter 1 - Installing the OkiLAN 6100e+
OKI OkiLAN 6100e+ User’s Guide
Hardware Installation
7a. OKIPAGE 16n, 18, 20, 20DX and 24DX: Remove and
save the two screws on the left of the metal plate
covering the internal board, then pull the plate out about
an inch and lift it out.
Pry off the plastic cutout on the back of the printer.
7b. OKICOLOR 8: Remove and save the three screws on the
top of the metal plate covering the internal board, then
pull the plate out about an inch and lift it out.
Unfasten the screw holding the metal blank onto the
back of the printer and remove it.