Filter
Top Products
V - 18
Section 5 - Chapter 3 - The OkiNet for VINES Utility
OKI OkiLAN 6100e+ User’s Guide
Saving Configuration Settings
When you are satisfied with your configuration
settings, select OK from the Configuration screen. This
will save all changes and return you to the main menu.
Verifying Communication
To verify communication, send a print job to the printer
using the VINES BPRINT command. BPRINT prints a
DOS file to a network printer.
The command syntax is:
BPRINT filename/P:service_name
where…
filename is the name of the file you want to print.
Service_name is the StreetTalk name of the Print
Service you established for the OkiLAN 6100e+.
Resetting the OkiLAN 6100e+
The Print Server Configuration screen contains the
Reset pull-down menu. You may want to reset the
OkiLAN 6100e+ to correct network error conditions
(for example, if your file server fails). From this menu,
select Reset Print Server to establish a new
connection to the network.
CAUTION: Make sure that no print jobs are active
when you reset the OkiLAN 6100e+. If you attempt to
reset the OkiLAN 6100e+ while a job is printing, the
job will not print successfully.
Restoring the Factory Default
Configuration
You can use the Reset option to restore the factory
default configuration of your OkiLAN 6100e+.