Filter
Top Products
X - 5
Section X - Chapter 2 - Installation and Configuration
OKI OkiLAN 6100e+ User’s Guide
IR Printing
Chapter 2
Installation and Configuration
Installing the Hardware
To install the IR Transceiver, attach the DIN-6 connector
on the back of the OkiLAN 6100e+ print server.
General Information on Configuring
Your Print Server for IR
If you wish to print via infrared to an IrDA-capable
printer, you need to redirect an existing printer driver to
use the infrared printer port. You can generally either
change an existing printer driver or install a new printer
driver and connect it to an active IrDA port.
Printing in Windows 95 and 98
Below are the steps to setup a printer in Windows 95 or
Windows 98 for infrared use:
1. Select Start, Settings and then Printers.
2. Double-click Add Printer to begin the Add
Printer Wizard.
3. Click Next.
4. Select the button labeled Local printer.
5. Scroll through the Manufacturers and Printers
screens to locate and select your printer, then
click Next.