Filter
Top Products
VII - 8
Section 7 - Chapter 2 - The OkiLAN 6100e+ Utility
OKI OkiLAN 6100e+ User’s Guide
Zone = Default - (The default zone for the network
segment will be used)
Port Enabled = Yes
Appendix A
Troubleshooting
Before You Call
This appendix allows you to troubleshoot problems you
may have installing or using the EtherTalk protocol.
After trying these suggestions, if you are still having
difficulty, call Okidata Customer Support at 1-800-
OKIDATA (1-800-654-3282).
If you have trouble sending data to the printer through
your OkiLAN 6100e+, check the following:
• Verify that the OkiLAN 6100e+ printer appears in
the Chooser
• Printer configuration
• Printer hardware
• OkiLAN 6100e+ configuration
• OkiLAN 6100e+ hardware
• Cabling and/or connectors
• Macintosh System version
• LaserWriter driver version
• Application software configuration
OkiLAN 6100e+ Does Not Appear in
the Macintosh Chooser
If the OkiLAN 6100e+ does not appear in the Chooser
as a LaserWriter device, check the following:
• Print a configuration sheet. Verify that the EtherTalk
protocol and port are enabled.
• Verify that the AppleTalk type is LaserWriter.