Filter
Top Products
IV - 21
Section 4 - Chapter 3 - TCP/IP Configuration and Printing
OKI OkiLAN 6100e+ User’s Guide
TCP/IP
Example: The following example prints a PostScript
file called chart.ps to the OkiLAN 6100e+ printer Port 1
using FTP.
$ ftp OkiLAN 6100e_name<Enter>
Connected to OkiLAN 6100e_name.
220 ESI-2810 Version 3.0 ready.
Name (OkiLAN 6100e_name:anyone):<Enter>
230 User logged in.
ftp> binary<Enter>
200 Type set to I.
ftp> put chart.ps MPX1<Enter>
local: chart.ps remote: MPX1
200 PORT command successful.
150 Opening BINARY mode data connection for
MPX1.
226 Transfer complete.
4549 bytes sent in 0 seconds (4.4 Kbytes/s)
ftp> bye<Enter>
221 Goodbye.<Enter>
$
Timeout Checking
If timeout checking is enabled on the OkiLAN 6100e+,
the OkiLAN 6100e+ will close any connection that stays
idle for more than five minutes. For example, if you
open an FTP connection to the OkiLAN 6100e+ and
walk away from your computer for more than five
minutes, the FTP connection will be closed. You can
reestablish a connection to the OkiLAN 6100e+ with the
OPEN command.