Filter
Top Products
X - 6
Section X - Chapter 2 - Installation and Configuration
OKI OkiLAN 6100e+ User’s Guide
6. For Windows 95 users only: Under the Available
ports window, select either Infrared Printing
(LPT) Port (recommended) or select the COM
port labeled Infrared Serial (COM)
Connections Port, then click Next.
For Windows 98 users only: Under the Available
ports window, select either Virtual Infrared
LPT Port (recommended) or select the COM
port labeled Virtual Infrared COM Port, then
click Next.
7. Decide whether you want the printer to be your
default printer for all Windows based programs.
Select the appropriate button and click Next.
8. Set the mobile device within range (usually 1-2
ft.) of the IR Tranceiver at the OkiLAN 6100e+.
9. Print a test page and click Finish.
Printing From Your Windows CE or
Palm Device
Your Windows CE or Palm PDA device is capable of
printing directly to an infrared-capable printer. Ensure
that printing utilities are available and that the generic
driver type (PCL, PostScript) matches the target printer.
1. Position the infrared-equipped printer so that the
infrared window is in line with the infrared port
on your Windows CE device. The infrared
devices must be lined up within 3 feet (1 meter)
of each other in order to print.
2. From within an application (such as Pocket
Word), click File and then select Print. Verify
that Infrared is selected in the Port menu.
3. Click OK to send your print job.