Filter
Top Products
V - 20
Section 5 - Chapter 3 - The OkiNet for VINES Utility
OKI OkiLAN 6100e+ User’s Guide
Configuring the TCP/IP Protocol
To configure options for the TCP/IP protocol, select
TCP/IP Configuration from the Protocols menu from
the Print Server Configuration screen.
VPMAN will ask for the TCP/IP password. If a
password has been set, type the password and select
OK. If a password has not already been selected, select
OK. The following window will display:
Note: If a password has not already been set, set it
now by selecting Change Password from the
TCP/IP Configuration screen.
Connection Timeout
This option allows you to enable connection timeout
checking. This timeout is used to sever network TCP/IP
connections that are idle for more than five minutes.
Under most conditions, this option should remain
enabled.
IP Address
This setting will configure the OkiLAN 6100e+ to
remember its IP address. If the OkiLAN 6100e+ has
been configured to remember its IP address, it does not
need to determine its address each time it is powered
on.