Filter
Top Products
5.4 Message List 103
Error code Reason/Action
003-747 Wrong combination of print parameters, like selecting to print on custom size paper and setting
[Auto] for [Paper Source] on the printer driver and [Auto] for [Paper Size] in trays 1 to 4 on the
control panel.
Check the print parameters.
010-420 Time to replace parts.
Contact and inform our Printer Support Desk or dealers of the error code “010-420”.
016-500 SMTP server name is not set correctly.
Check whether the settings for SMTP server are correct under [Network] of OkiWebRemote.
Also check the settings for DNS server.
Refer to
• “Environment Settings for E-mail Printing” (P. 38)
016-501 POP3 server name is not set correctly.
Check whether the settings for POP3 server are correct under [Network] of OkiWebRemote.
Also check the settings for DNS server.
Refer to
• “Environment Settings for E-mail Printing” (P. 38)
016-502 Failed to login to POP3 server.
Check whether the POP3 user name and password are correct under [Network] of OkiWebRemote.
Refer to
• “Environment Settings for E-mail Printing” (P. 38)
016-503 SMTP server name is not set correctly.
Check whether the settings for SMTP server are correct under [Network] of OkiWebRemote.
Also check the settings for DNS server.
Refer to
• “Environment Settings for E-mail Printing” (P. 38)
016-504 POP3 server name is not set correctly at [POP before SMTP] for sending e-mails.
Check whether the settings for POP3 server are correct under [Network] of OkiWebRemote.
Also check the settings for DNS server.
Refer to
• “Environment Settings for E-mail Printing” (P. 38)
016-505 Failed to login to POP3 server at [POP before SMTP] for sending e-mails.
Check whether the POP3 user name and password are correct under [Network] of OkiWebRemote.
Refer to
• “Environment Settings for E-mail Printing” (P. 38)
016-701 PCL XL print data cannot be processed due to insufficient memory.
When [1200dpi] is selected for [Print Mode] in the [Graphics] tab, set it to [600dpi] and print again.
Refer to
• On-line Help for the printer driver
016-702 PCL XL or PostScript print data cannot be processed due to insufficient print page buffer.
Use one of the following methods to fix the error:
• When [1200dpi] is selected for [Print Mode], set it to [600dpi].
• Select [On] for [Page Print Mode] in the [Detailed Settings] tab (for PCL XL only).
• Increase the print page buffer.
• Install the additional memory (optional) to increase the memory.
Refer to
• [Print Mode] / [Page Print Mode]: On-line Help for the printer driver
• Print page buffer: “Allocate Memory” (P. 79)