Oki 6300 Printer User Manual


 
142 A Appendix
A.5 Precautions and Limitations
Precautions and Limitations of This Printer
This section explains the precautions and limitations of using this printer.
Optional Hard Disk
When the hard disk (optional) has been installed on this printer, 128 MB of memory must
be installed as well.
When the hard disk is installed, the printer may assume that data in the hard disk is
corrupted if power is cut off when the printer is in use.
When the hard disk is installed, the hard disk can be specified as a storage location for
print data from LPD, SMB and IPP. PCL, ESC/P, HP-GL and HP-GL/2 forms are stored
in the hard disk. The storage location for the forms cannot be changed.
Data that will be deleted during initialization includes the additional fonts, the PCL, ESC/
P, HP-GL, and HP-GL/2 forms, and SMB folders. Secure/Proof/Delayed Print documents
and their logs will not be deleted.
When Print Result Is Different From the Settings
The print result may differ in the following ways from the settings due to insufficient print
page buffer. In this case, we recommend you increase the memory capacity.
Document is printed on one side although duplex printing is specified
Job is canceled (where a page in the job cannot be expanded in the print page buffer)
Optional Accessories
The hard disk (optional) must be installed in order to use the Secure/Proof/Delayed Print
and Page Print Mode features.
Meter Count in Duplex Printing
When printing two sided documents, blank sheets may be automatically inserted into the
document depending on the number of copies specified and the application used. Blank
sheets inserted by the application will be counted as 1 page.