Filter
Top Products
60 4 Settings on the Control Panel
Output Size
Specifies the paper size to be printed.
The candidate values are as follows:
[A4]
[A5] [B5]
[8.5 × 11] (Letter)
[8.5 × 14] (Legal)
[8.5 × 13] [7.25 × 10.5]
Note
• This default setting varies from [A4] to [8.5 × 11"] depending on the countries.
Output Tray
Specifies the output tray for printed paper.
[Center Tray] (default)
[Rear Tray]
[OffsetCatchTray]
Note
• [Rear Tray] is available only when the printer is B6300.
• [OffsetCatchTray] is available only when the optional offset catch tray is installed.
Orientation
The paper printing direction can be selected from [Portrait] and [Landscape]. The default is
[Portrait].
Duplex
Specifies whether to perform 2 sided printing. The default is [Off].
When you select [On], you can select [Long Edge Flip] or [Short Edge Flip] as the binding
direction.
Note
• You can set this item only when the 2 sided printing function is available.
Font
Specifies the font used. The default is [23 Courier].
Symbol Set
Specifies the font for symbols. The default is [ROMAN-8].
Font Size
Specifies the font size. The default is [12.00]. You can specify a value between 4.00 and
50.00 in increments of 0.25.
Font Pitch
Specifies the character spacing.The default is [10.00]. You can specify a value between
6.00 and 24.00 in increments of 0.01.
Form Lines
Specifies the form line (the number of lines per form). This default setting varies from [64]
to [60] depending on the countries. You can specify a value between 5 and 128 in
increments of 1.