Filter
Top Products
72
4-1-4 Online Operations
The following operations are possible when connected online to the PC.
Group Name Description
Monitoring Monitor Data Uses the lower one third of the screen as a monitor area where bits, words, DM
contents, and TIM/CNT SV/PV are monitored, forced-set/reset, and changed.
Transfer Program Transfers and compares the user program between the computer and PC.
Change Display C-series PCs
Ladder W/Comments
Ladder
CVM1 PCs
Ladder
Ladder (2 rows of comments)
Ladder (4 rows of comments)
Online Edit Simultaneously edits the PC program and the program in the system work area.
Read Cycle Time Reads and displays the scan time of the PC.
Clear Area Clears the PC data areas such as HR, CNT, AR, and DM (to zero).
Search Searches for instructions (including specified operands).
I/O Comments Searches for I/O comments.
Block Comments Searches for block comments.
Memory Usage Displays used program memory area, the number of comments used, and the
available capacity of the internal memory.
DM
Transfer
PC —> Computer
Retrieves PC DM data to the system work area. (C-series PCs only)
Transfer
Computer—>PC
Writes system work area DM data to the PC. (C-series PCs only)
Transfer
Verify
Compares DM data between the system work area and PC. (C-series PCs only)
Monitor Used to monitor DM area contents in the PC. (C-series PCs only)
Go To Page Reads a specified page from the DM list of the DM area in the system work area
or PC. (C-series PCs only)
I/O Table Transfer I/O Table Transfers and compares the I/O table data between the computer and PC.
Create I/O Table Registers into the PC the I/O Units mounted on the PC and then assigns the
words to the Units.
Verify I/O Table Compares the I/O table registered in the PC against the I/O Units actually
mounted on the PC.
Utility
File Memory/
Memory Card
Displays a file memory list; transfers the file memory contents between the PC
and computer or the PC and File Memory Unit; clears the file memory; saves or
retrieves the file memory contents to or from a floppy disk; and edits file memory
contents
Time Chart Monitor Used to execute time chart monitoring and to display, save, or retrieve results.
(C-series PCs only)
Instruction Trace Used to execute instruction traces and used to display, save, or retrieve results.
(C-series PCs only)
Data Trace Used to execute data traces and used to display, save, or retrieve results.
Debug Used to display the execution status of the specified program section.
(C-series PCs only)
Display/Set Clock Used to read and set the internal clock in the PC. (CQM1, C200HS, or CVM1
only)
Transfer Instr Used to transfer expansion instruction set from the PC to the SSS.
(C-series PCs only)
PC Setup Changes the PC Setup in the PC and in the system work area and used to
transfer the PC Setup between the PC the disk (save/retrieve).
Network Support
Tables
C-series PCs: Used to input data link tables for SYSMAC NET.
CVM1 PCs: Used to transfer data link tables and routing tables between Link
Units, the PC, and the SSS and to compare these tables. Also used
to start and start data links.
Support Software Capabilities Section 4-1