Filter
Top Products
14
15
Detaching and Attaching the Stand
The stand is detachable.
•When detaching and attaching the stand, it is recommended that you place the unit flat on the edge of a desk or table with a soft
cloth or similar material spread underneath.
•The stand is specifically designed for this monitor and cannot be used with other monitors.
Detaching the Stand
Stand mounting screws
Remove the stand mounting screws (four) using a Phillips
screwdriver.
•Store the detached stand and stand mounting screws in a safe
place for future use.
Attaching the Stand
④
①
② ③
1. Align the holes in the stand with those in the monitor.
2. Use a Phillips screwdriver to secure the stand to the unit
with the stand mounting screws (four).
•Install the mounting screws in the order (A to D) shown in
the figure.
•When attaching the stand, tighten the stand mounting
screws to a tightening torque from 80 N·cm to 120 N·cm.