Filter
Top Products
44
Main Menu (Continued)
45
ZOOM POSITION display position sequence
Display position of ZOOM POSITION: A→B→C→D→E→A→andsoon
A CENTER B LT C RT D RB E LB
ZEBRA
The stripes of the ZEBRA function appear over an image (in the viewfinder) to help you adjust the aperture of a camera lens for
optimum exposure and easily find the areas of an image that are overexposed and white (where clipping occurs).
Pressthe<FUNCTION1>to<FUNCTION5>(→page12)buttonwith[ZEBRALEVEL]assignedinthe[MEASURESETUP]menuto
set the [INT. MIN.], [INT. MAX.], [EXT. MIN.] and [EXT. MAX.] levels.
Press the <FUNCTION1> to <FUNCTION5> button with [ZEBRA] assigned to turn the ZEBRA function on.
[INT. MIN.] and [INT. MAX.] show ZEBRA stripes for areas within the range set in the menu.
[EXT. MIN.] and [EXT. MAX.] show ZEBRA stripes for areas outside the range set in the menu.
[INT. MIN.] and [INT. MAX.] ZEBRA
pattern
[EXT. MIN.] and [EXT. MAX.] ZEBRA
pattern
<Note>
•Black sections outside the image area may also be shown as ZEBRA stripes.
•The ZEBRA pattern may become offset by input selection or function operation.
Y MAP
The Y MAP function makes it easy to visually confirm the overall screen brightness (luminance level map).
Pressthe<FUNCTION1>to<FUNCTION5>(→page12)buttonwith[YMAP]assignedtoturnthefunctionon.
Turning on this function displays a simplified chart at the left side of the screen.
•Simplified chart details (The numbers in the simplified chart indicate Y signal levels.)
<Note>
•When [HALF] or [BLACK] is selected in the [BACK] item of the [MARKER] menu, the simplified chart indicates a signal level of 50 %
or may not be displayed at all.
•When the Y MAP function is turned on, [BLACK MODE] is turned off.
•The black parts outside the image area may be displayed at 0 % (dark blue) or less than 0 % (magenta).