Panasonic BT-4LH310 Computer Monitor User Manual


  Open as PDF
of 76
 
16 17
On-screen Display (Continued)
2. Turn the rotary knob <PICTURE> to select a menu ([MAIN MENU], [FUNCTION], or [INPUT SELECT]) and press the rotary
knob <PICTURE>.
•Fordetailsonhowtooperatemenus,referto“On-screenMenuOperations”(→page20).
[MAIN MENU] [FUNCTION] [INPUT SELECT]
MENUEXIT SEL. RETURN
RETURN
MAIN MENU
MARKER
VIDEO CONFIG
MEASURE SETUP
SYSTEM CONFIG
FUNCTION
AUDIO
DISPLAY SETUP
CONTROL
INFORMATION
MENUEXIT SEL. ENTER RETURN
RETURN
FUNCTION
F1:
F3:
F4:
F5:
SETUP
ZOOM MODE OFF
ZOOM MODE
Y MAP
FRAME GRAB
ZEBRA
SDI DISPLAY MODE
USER1
MENUEXIT
RETURN
RETURN
INPUT SELECT
SDI
DisplayPort
HDMI
INT-SG
Instructions on <MENU> button operations are displayed.
3. To close a menu, press <MENU>.
•The menu display disappears after approximately 2 minutes of inactivity. (The value shown before the display disappears is con-
firmed as the setting value.)
Picture Adjustment (PICTURE) Menu Display
MENUEXIT SEL. ENTER RETURN
RETURN
PICTURE
SETTING [FACTORY]
PEAKING
PHASE
CHROMA
BRIGHT
CONTRAST
BACKLIGHT
FOCUS-IN-RED
0
30
30
30
60
80
15
A
B
A: The file name called by [SETUP LOAD] or [POWER ON
SETUP] is displayed for [SETTING].
B: When the picture adjustment values ([PEAKING]/
[PHASE]/[CHROMA]/[BRIGHT]/[CONTRAST]/[BACK-
LIGHT]) are changed from the factory defaults, the posi-
tion pointers are displayed in white.
1. Press the rotary knob <PICTURE> when no menu is
displayed.
•The [PICTURE] (picture adjustment) menu appears.
• For details on how to operate menus, refer to “Picture
Adjustment(PICTURE)Menu”(→page21).
2. To close a menu, press <MENU>.
•This display disappears after approximately 10 seconds of
inactivity. (The value shown before the display disappears is
confirmed as the setting value.)
Audio Volume Display
VOLUME 0
1. Press <RETURN/VOLUME> when no menu is displayed.
•The audio volume bar meter appears.
•For details on how to operate the audio volume, refer to“On-
screenMenuOperations”(→page20).
2. To close a menu, press <MENU>.
•This display disappears after approximately 10 seconds of
inactivity. (The value shown before the display disappears is
confirmed as the setting value.)
FUNCTION Display
USER1
F1 : ZOOM MODE
F2 : Y MAP
F3 : FRAME GRAB
F4 : FOCUS-IN-RED
F5 : MARKER
ZOOM MODE OFF
A
•The display settings can be set from the [FUNCTION] menu.
•When[FUNCTIONDISPLAY](→page38)issetto[ON1]or
[ON2], press any of the <FUNCTION1> to <FUNCTION5>
buttons to display the status of the item set for FUNCTION.
•If no operation is performed for approximately 2 seconds, the
set value is confirmed and the display disappears.
•"A"indicatestheoperatingstatus.(→”Operationitemsdis-
played on the screen during FUNCTION button operation” on
page 39)
•The items assigned to F1 to F5 can be changed in [SETUP]
(→page38).
 previous next