Panasonic BT-4LH310 Computer Monitor User Manual


  Open as PDF
of 76
 
38
39
Main Menu (Continued)
FUNCTION setting restrictions
Under the following conditions, “INVALID FUNCTION” is displayed and the settings cannot be set.
Setting Condition or mode when operation not possible
BLUE ONLY •When Y MAP ON
GAMMA SELECT •When GPI item is set
WHITE BALANCE •When other than VAR1 to VAR3 is selected in COLOR TEMP.
MONO •WhenGPIitemisset •WhenYMAPON
BLACK MODE •WhenNOSIGNAL •WhenPICTUREASSISTON
•When Y MAP ON
R COLOR •When[BLUEONLYON]isselected •WhenYMAPON
G COLOR •When[BLUEONLYON]isselected •WhenYMAPON
B COLOR •When[BLUEONLYON]isselected •WhenYMAPON
SDI DISPLAY MODE •When other than SDI input
ZOOM MODE •When other than 4K signal input
ZOOM POSITION •When other than 4K signal input
PIXEL TO PIXEL •When GPI item is set
•When other than 1280 × 720p signal input
•When [INT-SG] is selected
FRAME GRAB •When [INT-SG] is selected
•When [SDI] is selected and SDI DISPLAY MODE is QUAD
•When NO SIGNAL input
DISPLAY SELECT •When SDI DISPLAY MODE is SINGLE
•When SDI DISPLAY MODE is QUAD and MULTI FUNCTION is ON
MULTI FUNCTION •When other than [SDI] is selected
PICTURE ASSIST •When other than [SDI] is selected
WFM LINE SELECT •When SDI DISPLAY MODE is SINGLE
•When MULTI FUNCTION is other than ON
•When WFM LINE SELECT is ALL
LEVEL METER •When[INT-SG]isselected •WhenPICTUREASSISTON
TIME CODE •When other than [SDI] is selected
CLOSED CAPTION •WhenDisplayPort/HDMIisselected •When4K/PCsignalinput
•WhenSDIDISPLAYMODEisQUAD •When[INT-SG]isselected
MARKER •WhenPICTUREASSISTON •PIXELTOPIXEL
•WhenMULTIFUNCTIONisON  •WhenPCsignalinput
•When [SDI] is selected and SDI DISPLAY MODE is QUAD
FRAME MARKER •Refer to “MARKER” above.
OUTER LINE MARKER •Refer to “MARKER” above.
FOCUS-IN-RED •WhenGPIitemisset •WhenINT-SGisselected
•WhenBLUEONLYONisselected •WhenYMAPON
•WhenNOSIGNALinput  •WhenMULTIFUNCTIONisON
Y MAP •When[INT-SG]isselected •WhenMULTIFUNCTIONisON
ZEBRA •WhenYMAPON •When[INT-SG]isselected
•When GPI item is set
Operation items displayed on the screen during FUNCTION button operation
Pressing any of the <FUNCTION1> to <FUNCTION5> buttons displays the operation assigned to the corresponding button as
shown below.
Setting Display
BLUE ONLY [BLUEONLYOFF]→[BLUEONLYON]
GAMMA SELECT [GAMMA2.20]→[GAMMA2.35]→[GAMMA2.40]→[GAMMA2.60]→[GAMMAFILM]→
[GAMMA. (MANUAL SET)]
WHITE BALANCE [WHITE BALANCE VAR1/2/3]
MONO [MONOOFF]→[MONOON]
BLACK MODE [BLACKMODEOFF]→[BLACKMODEON]
R COLOR [RCOLORON]→[RCOLOROFF]
G COLOR [GCOLORON]→[GCOLOROFF]
B COLOR [BCOLORON]→[BCOLOROFF]
 previous next