Filter
Top Products
40
41
Main Menu (Continued)
FUNCTION skip function
This function allows you to skip some of the setting items of functions assigned to FUNCTION during FUNCTION operation.
When the operations of the functions assigned to <FUNCTION1> to <FUNCTION5> in the FUNCTION menu are performed, a
submenu that allows you to skip the setting items of the functions appears. Set the setting items you want to skip during FUNCTION
operation to [OFF].
A submenu appears for the following functions.
[GAMMA SELECT]/[ZOOM POSITION]/[DISPLAY SELECT]/[CROSS HATCH]/[ZEBRA]
<<Setting example>>
Select [ZEBRA] in the [FUNCTION] menu and press the rotary knob <PICTURE> to open the submenu shown below.
1. Turn the rotary knob <PICTURE> to select the setting
item you want to skip and press the rotary knob <PIC-
TURE>.
•The setting value can be changed.
ZEBRA SELECT
INT.
EXT.
INT.+EXT
ON
ON
ON
2. Turn the rotary knob <PICTURE> to select [OFF] and
press the rotary knob <PICTURE>.
ZEBRA SELECT
INT.
EXT.
INT.+EXT
OFF
ON
ON
3. Press <RETURN/VOLUME>.
•The submenu closes and the [FUNCTION] menu reappears.
SDI DISPLAY MODE function
SDI DISPLAY MODE function allows you to select the display mode for SDI input video.
•When [SINGLE] is set, the selected input video is displayed over the entire screen.
•When [QUAD] is set, the entire screen is split into four areas and the input video of each of SDI1, SDI2, SDI3, and SDI4 is dis-
played in a separate area.
The display positions of SDI1, SDI2, SDI3, and SDI4 are fixed (SDI1 at top left, SDI2 at top right, SDI3 at bottom left, and SDI4 at
bottom right).
<Note>
•When video is displayed while [QUAD] is set, inputs in the same format as the SDI1 input are displayed.
•The audio level meter and time code can be displayed for each input video when [QUAD] is set.
•Normal mode, [PICTURE ASSIST] mode, and [MULTI FUNCTION] mode are available when [QUAD] is set. For each mode, the
display can be changed by turning the function on or off.
•When [QUAD] is set, a 4K signal cannot be displayed.
SINGLE screen
QUAD screen
Press the <FUNCTION> button to which
the SDI DISPLAY MODE function has been
assigned.
Press the same button again