Filter
Top Products
38
Main Menu (Continued)
39
Submenu Setting Description
(Continued from the
previous page)
[TIME CODE]
*
2
Turns the time code display on or off.
[CLOSED CAPTION]
*
2
Turns the closed caption display on or off.
For details on the available operation items, refer to page 40.
[MARKER]
*
2
*
4
Displays the marker.
For details on the available operation items, refer to page 40.
[FRAME MARKER]
Displays the frame marker.
Displays the marker on the outer perimeter of the panel.
[OUTER LINE MARKER]
Leaves the outer perimeter of the video and displays a halftone marker on the
inside of it.
[CROSS HATCH]
*
2
Displays the cross hatch.
[FOCUS-IN-RED]
*
3
*
6
Turns the function that emphasizes the portion of the image in focus in red on or
off.
[Y MAP]
*
2
Turns the Y MAP function on or off.
[ZEBRA]
*
2
*
3
Selects the ZEBRA function.
[ZEBRA LEVEL]
Displays the screen for adjusting the level of the ZEBRA function.
[SCREEN SAVER]
Turns the screen saver function on.
Turns the panel backlight off to facilitate low power consumption and as a burn-
in reduction measure in the event of burn-in on the panel.
The function operation can be cancelled by front button operation or GPI
operation.
[LUT]
Reproduces colors in accordance with the set COLOR SPACE.
[UNDEF]
Unset
SETUP
*
7
USER1
USER2
USER3
USER4
USER5
Saves up to 5 sets of FUNCTION settings (FUNCTION 1 to 5).
FUNCTION
DISPLAY
*
8
OFF
ON1
ON2
*
9
Sets the display of the functions assigned to <FUNCTION1> - <FUNCTION5>
(front panel buttons). It also selects the button action (1- touch, 2-touch, off).
[OFF] 1-touch action to perform function operations. Functions are not displayed.
[ON1] 1-touch action to display functions and perform function operations.
[ON2] 2-touch action to display functions and perform function operations.
•Pressing the <FUNCTION1> to <FUNCTION5> buttons will not perform the FUNCTION operations when the [PICTURE] (picture
adjustment) menu has been displayed with the rotary knob <PICTURE>.
*
2
If these settings are changed, the menu settings will also change.
*
3
The control settings are not available during GPI operation.
*
4
This is not displayed when all of the [ASPECT1], [AREA1], [ASPECT2], [AREA2], [CENTER] and [CROSS] settings are [OFF] in
the [MARKER] menu settings.
*
6
During the FOCUS-IN-RED operation, use the rotary knob <PICTURE> to change the detection sensitivity.
The setting range is from 1 to 30, with a higher numerical value resulting in a higher detection sensitivity (the focus becomes less
sharp).
*
7
[USER1] to [USER 5] have the same factory defaults.
*
8
The operating status is displayed regardless of the ON/OFF setting.
*
9
When this is set to [ON2], the functions can be operated with the buttons when the functions are displayed.
(Continued on next page)