Panasonic BT-4LH310 Computer Monitor User Manual


  Open as PDF
of 76
 
20 21
On-screen Menu Operations (Continued)
Picture Adjustment (PICTURE) Menu
1.
Turn the rotary knob <PICTURE> to select a menu item
and press the rotary knob <PICTURE>.
•The setting value of the selected menu item can be
changed.
MENUEXIT SEL. ENTER
PICTURE
SETTING [FACTORY]
PEAKING
PHASE
CHROMA
BRIGHT
CONTRAST
BACKLIGHT
FOCUS-IN-RED
0
50
50
50
50
100
15
Name Function
Adjustable range
( ): denotes the
factory default.
PEAKING PEAKING 0 to 60 (0)
PHASE PHASE 0 to 100 (50)
CHROMA CHROMA 0 to 100 (50)
BRIGHT BRIGHT 0 to 100 (50)
CONTRAST CONTRAST 0 to 100 (50)
BACKLIGHT BACKLIGHT 0 to 200 (100)
FOCUS-IN-RED FOCUS-IN-RED 1 to 30 (15)
The position pointer color is green only for values that are the
factory default, and is white for the other values.
The settings are loaded when the unit is turned on. However,
operations and changes are not possible in the following
cases.
•When the control lock is on, the
mark is displayed
andthesettingscannotbechanged.(→page48)
•[PEAKING] displays the outline correction edge on the
outer perimeter of the screen in SINGLE screen or QUAD
screen mode.
•When[MONO](→page29)issetto[ON],the[PHASE]and
[CHROMA] operations are disabled.
•[FOCUS-IN-RED] is enabled during operation of the
FOCUS-IN-RED function.
•When[BLACKMODE](→page37)issetto[ON],the[CON-
TRAST] and [BACKLIGHT] operations are disabled.
2. Turn the rotary knob <PICTURE> to select a setting value
and press the rotary knob <PICTURE>.
•The set value is confirmed and the menu reappears.
•To cancel, press <MENU> before pressing the rotary knob
<PICTURE>.
MENUEXIT SEL. ENTER
PICTURE
SETTING [FACTORY]
PEAKING
PHASE
CHROMA
BRIGHT
CONTRAST
BACKLIGHT
FOCUS-IN-RED
0
50
50
50
50
100
15
•When the picture adjustment values ([PEAKING]/[PHASE]/
[CHROMA]/[BRIGHT]/[CONTRAST]/[BACKLIGHT]) are
changed from the factory defaults, the position pointers are
displayed in white.
Audio Volume
•For details on how to display the audio volume, refer to “Audio
VolumeDisplay”(→page17).
1. Turn the rotary knob <PICTURE> to select a setting
value.
VOLUME 0
•Setting values are confirmed when they are changed.
•Changing the audio volume when the audio output is muted
(→“AUDIOMUTE”page37)immediatelycancelsthemute
state.
•VOLUME(X) is displayed when audio output of the unit is
muted.
•Audio volume is always available and is not affected by the
[CONTROL]menu(→page48).
•The adjustment range is 0 to 60 (the factory default is 0).
 previous next