Panasonic BT-4LH310 Computer Monitor User Manual


  Open as PDF
of 76
 
40
Main Menu (Continued)
41
Setting Display
SDI DISPLAY MODE [SDIDISPLAYMODESINGLE]→[SDIDISPLAYMODEQUAD]
ZOOM MODE [ZOOMMODEOFF]→[ZOOMMODEON]
ZOOM POSITION [ZOOMPOSITIONCENTER]→[ZOOMPOSITIONLT]→[ZOOMPOSITIONRT]→
[ZOOMPOSITIONRB]→[ZOOMPOSITIONLB]
PIXEL TO PIXEL [PIXELTOPIXELOFF]→[PIXELTOPIXELON]
FRAME GRAB [FRAMEGRABOFF]→[FRAMEGRABON]
DISPLAY SELECT The displayed items differ depending on the mode.
•When normal mode of QUAD mode
[DISPLAYSELECTSDI1]→[DISPLAYSELECTSDI2]→[DISPLAYSELECTSDI3]→
[DISPLAY SELECT SDI4]
•When PICTURE ASSIST mode of QUAD mode
[AREA2]→[AREA3]→[AREA4]
MULTI FUNCTION [MULTIFUNCTIONOFF]→[MULTIFUNCTIONON]
PICTURE ASSIST [PICTUREASSISTOFF]→[PICTUREASSISTON]
WFM LINE SELECT [SETTING]
AUDIO MUTE [AUDIOMUTEOFF]→[AUDIOMUTEON]
LEVEL METER [METEROFF]→[METER2CH/4CH/8CH]
TIME CODE [TCOFF]→[LTC/VTC/LUB/VUB/LTC+LUB/VTC+VUB]
CLOSED CAPTION The displayed items differ depending on the [CC TYPE] selection.
•When the [CC TYPE] setting is [CEA-608(708)]:
[CCOFF]→[CC1/2/3/4]
•When the [CC TYPE] setting is [CEA-708]:
[CCOFF]→[SRV1/2/3/4/5/6]
•When the [CC TYPE] setting is [OP-47]:
[CCOFF]→[OP-47]
MARKER
[MARKEROFF]→[RATIOAspectMarkerTypeandAreaMarkerType]
*
1
Splits each of the RATIO/Aspect Marker Type/Area Marker Type into the two lines Aspect Marker 1 and
Aspect Marker 2, and displays the current setting values.
•RATIO
17:9/16:9
•Aspect Marker Type
17:9/16:9/4:3/13:9/14:9/CNSCO 2.39/CNESCO 2.35/2:1/VISTA
•Area Marker Type
95%/93%/90%/88%/80%/xx%
*
2
/yy%/zz%
*
3
/DOThhhh/xxxx/LINEvvvv/yyyy
*
4
*
1
If an area marker is displayed when aspect marker is off, the aspect marker type is displayed.
*
2
xx% indicates an 80% to 100% USER setting.
*
3
yy%/zz% indicates the VAR setting when an 80% to 100% aspect ratio is specified.
*
4
hhhh/xxxx indicates the H direction setting when the area marker DOTLINE is specified, and vvvv/yyyy
indicates the V direction setting.
FRAME MARKER [FRAMEMARKEROFF]→[FRAMEMARKERON]
OUTER LINE
MARKER
[OUTERLINEMARKEROFF]→[OUTERLINEMARKERON]
CROSS HATCH [CROSSHATCHOFF]→[CROSSHATCHLOW]→[CROSSHATCHHIGH]
FOCUS-IN-RED [FOCUS-IN-REDOFF]→[FOCUS-IN-REDRED/BLUE/MONO]
Y MAP [YMAPOFF]→[YMAPON]
ZEBRA [ZEBRAOFF]→[ZEBRAINT.]→[ZEBRAEXT.]→[ZEBRAINT.+EXT.]
ZEBRA LEVEL [SETTING]
SCREEN SAVER [SCREENSAVEROFF]→[SCREENSAVERON]
LUT [STANDARD]→[USER1]→[USER2]→[USER3]
<Note>
•[WHITE BALANCE] and [ZEBRA LEVEL] are switched to the adjustment mode with a <FUNCTION> button but the operating status
is not displayed.
•[/] indications (for example, [CC1/2/3/4]) vary depending on the menu setting.
 previous next