Panasonic BT-4LH310 Computer Monitor User Manual


  Open as PDF
of 76
 
42
43
Main Menu (Continued)
WFM/VECTOR
The WFM/VECTOR function allows you to display waveform and vector display screens. Set WFM display and VECTOR display in
the[MEASURESETUP]itemofthe[MAINMENU](mainmenu).(→page30)
100 %
109 %
4%
50 %
0 %
I axis
Q axis
BLUE
MAGENTARED
YELLOW
GREEN
CYAN
A dotted line
indicates for
each 10 %
increase.
The frame is
approx. 2.5 degrees
and approx. 2.5 %.
The horizontal lines in each frame are color coded to simplify
identification.
<Note>
•The WFM/VECTOR display is shifted one line at a set interval to prevent temporary afterimage (burn-in).
FRAME GRAB function
The FRAME GRAB function stores the entire screen in the unit and displays it as a still image.
•Thescreenchangeseachtimeyoupressthe<FUNCTION1>to<FUNCTION5>(→page12)buttonwiththeFRAMEGRABfunction
assigned.
•Use the FRAME GRAB function while a signal is being input. When the input signal is distorted, display may be distorted or some
parts may not be displayed. Also, the function will be disabled if there is no signal or the operation to switch the signal format,
switch the screen mode, or turn the power off is performed.
Press the same button again
SINGLE screen
SINGLE screen
Press the <FUNCTION> button to
which the FRAME GRAB function has
been assigned.
<Note>
•When FRAME GRAB is turned on/off, the AUDIO MUTE function is also turned on/off at the same time.
•This function is for when all of the inputs are the same format.
If inputs of different formats are displayed, the display may be distorted or some parts may not be displayed.
•If a frame is grabbed when the time code is displayed, the time code also stops at the same time but the video and time code
value do not match.
•When the FRAME GRAB function is turned on, some functions such as Y MAP do not work.
ZOOM
Use the ZOOM function to display a 4K signal in zoom mode. (4K signals only)
Setthisinthe[VIDEOCONFIG]itemof[MAINMENU](mainmenu).(→page28)
Pressthe<FUNCTION1>to<FUNCTION5>(→page12)buttonwiththeZOOMfunctionassignedtochangethedisplayinthefollow-
ing order.
Normal screen
ZOOM display
 previous next