Filter
Top Products
22
23
User Data
This unit can save up to five combinations of set values for MAIN MENU and screen adjustments made in the [PICTURE] (picture
adjustment) menu as user data that can be recalled.
You can also return set values and adjustments to their factory defaults.
User data includes the following settings.
•Menu settings except [SETUP LOAD]/[SETUP SAVE] and [REMOTE] in [CONTROL] (includes the function settings of the buttons
on the front panel of the unit)
•Screen adjustments made with the rotary knob <PICTURE>
Saving User Data
1.
Press <MENU> to display the main menu.
2. Turn the rotary knob <PICTURE> to select the [SYSTEM
CONFIG] menu and press the rotary knob <PICTURE>.
3. Turn the rotary knob <PICTURE> to select the [SETUP
SAVE] submenu and press the rotary knob <PICTURE>.
The setting values in the submenu can be changed.
INPUT NAME SETUP
SETUP LOAD
SETUP SAVE
POWER ON SETUP
POWER DOWN
POWER SAVE MODE
LED BRIGHT
CALIBRATION
FACTORY
USER2
LAST
OFF
OFF
HIGH
4. Turn the rotary knob <PICTURE> to select the setup to
save from [USER1] to [USER5] and press the rotary knob
<PICTURE>.
The following screen appears.
MENUEXIT SEL. ENTER RETURN
RETURN
SETUP SAVE
USER2
NO
YES
5. Select [YES] and press the rotary knob <PICTURE>.
The user data is saved.
6. To return to the previous screen, press <RETURN/VOL-
UME>.
Loading User Data
1.
Press <MENU> to display the main menu.
2. Turn the rotary knob <PICTURE> to select the [SYSTEM
CONFIG] menu and press the rotary knob <PICTURE>.
3. Turn the rotary knob <PICTURE> to select the [SETUP
LOAD] submenu and press the rotary knob <PICTURE>.
The setting values in the submenu can be changed.
INPUT NAME SETUP
SETUP LOAD
SETUP SAVE
POWER ON SETUP
POWER DOWN
POWER SAVE MODE
LED BRIGHT
CALIBRATION
USER1
USER2
LAST
OFF
OFF
HIGH
4. Turn the rotary knob <PICTURE> to select the setup to
load from [USER1] to [USER5] and press the rotary knob
<PICTURE>.
The following screen appears.
•To return the settings to the factory defaults, select [FAC-
TORY].
MENUEXIT SEL. ENTER RETURN
RETURN
SETUP LOAD
USER2
NO
YES
5. Select [YES] and press the rotary knob <PICTURE>.
The user data is loaded.
6. To return to the previous screen, press <RETURN/VOL-
UME>.
•The selection items of [FACTORY] are [YES(ALL)],
[YES(EXCEPT USER)], and [NO].
YES(ALL): Initializes the data including USER
DATA
*
1
.
YES(EXCEPT USER): Initializes the data except USER
DATA.
*
1
USER DATA is the data you uploaded with the FILM
GAMMA and COLOR SPACE(LUT)items.